Your location：Home → News → Company news
As a high-precision feeder specially adapted to the use of high-speed punch presses, the clip feeder will inevitably have defects due to imp...
The biggest difference between the mechanical NC feeder and the pneumatic NC feeder is the way of relaxation. The mechanical NC uses a mecha...
The three-in-one feeder is divided into three types: standard, medium and thick plates, which are distinguished according to the thickness o...
Air feeder: The air feeder is the earliest feeding equipment used in the stamping industry. Its principle is to use the air source as the po...
202006/23
As a high-precision feeder specially adapted to the use of high-speed punch presses, the clip feeder will inevitably have defects due to improper operation, incorrect debugging, machine wear and other factors in the practice process.
202006/23
The biggest difference between the mechanical NC feeder and the pneumatic NC feeder is the way of relaxation. The mechanical NC uses a mechanical rod to relax (requires a device to relax the rod on the punch slider), which relaxes quickly and does not crush th...
202006/23
The three-in-one feeder is divided into three types: standard, medium and thick plates, which are distinguished according to the thickness of the applicable data. The standard three-in-one feeder is suitable for the automatic production of 0.3-2.2mm thick thin...
202006/23
Air feeder: The air feeder is the earliest feeding equipment used in the stamping industry. Its principle is to use the air source as the power, clamp the material through the cylinder
202006/23
Whether it is light industry or heavy industry, the feeder is not a short mechanical auxiliary equipment. It is used to transport materials. It is a kind of basic equipment. With the development of technology, the machine has also been greatly updated. Nowaday...
Follow us
+86 13580817073